Our Proco range of coagulant powers treating 600-litres of spray booth waste water.
See the paint separating from the water in our Fusion mixing tank and being filtered in our Bigfloc units. Quick, easy and very effective process for all types of industrial water.
For more information on wastewater management - see our Aspifloc Site
We were recently asked by one of our customers if we could help another of their factories to reduce the cost of their water disposal. The water was being produced when they cleaned their wood handling machines and was contaminated with water-based ...
The washing of clothes, bedding & towels consumes a lot of water. Whilst new washing machines will use much less water, per load, than older models, and front loading machines much less than top loading machines - still, each load consumes anything ...
The textile industry is a major polluter of water at all stages of the value chain. It is reported that the annual water consumption of the textile industry is nearly 93 billion cubic litres (1 cubic metre = 1000 litres) which is almost 4% of the ...
So, you're diligently cleaning your spray guns and paint lines on a regular basis. You haven't had any blockages; the paint is flowing well, and you are pleased with the quality of your finish. The sun is shining, and the birds are singing and life ...
The ‘pulp and paper’ industry is one of the largest users of water in the industrial economy. It requires an average of 54 m3 of water to produce a metric ton of pulp or paper, and almost all phases of manufacturing require water. About 85% of the ...